Samsung 120 W 2.2Ch Micro Component MM-J430D ユーザーズマニュアル

English

Basic Functions

Recording Function

You can record from a CD, radio broadcast, or
an external source to a USB storage device.

Connect an external USB storage device to the
USB (

) jack on your product.

2. Play a disc, tune to a station, or connect an

external source to your product.

• Press the SOURCE button on the main unit to select

the DVD/CD function.

• Press the OPEN/CLOSE button to open the disc

tray.

• Insert a CD and press the OPEN/CLOSE button to

close the disc tray.

• Use the CD selection ( [ or ] ) buttons to select

the desired song.

Tuner

• Select FM by pressing the SOURCE button.
• Tune to a station you want to record.

External Source

• Connect an External Component/MP3 player to your

product.

• Press the SOURCE button to select <AUX> input.

• Play a song from the external device.

Press the USB REC button to start recording.

• “TRACK RECORDING” is displayed and CD

recording starts.

• Press and hold the USB REC button to start

recording all tracks on the disc. "FULL CD

RECORDING" is displayed.

MP3/WMA/PHOTO/DivX-RECORD DISC

• Press the USB REC button, the current playing file

is copied onto the USB device.

• To copy a music folder, highlight desired folder first

and press USB REC button, the folder is copied.

COPY: “CHECK”“START”“COPY XX”



“COPY END” is displayed. When the copy is done,

“STOP” will be displayed.

• If there is a duplicate file name, "FILE EXIST" is

displayed, and the function is canceled.

Tuner /External Source

• TUNER:TUNER RCORDING" -->"RECORD"
• AUX:AUX RECORDING" -->"RECORD"

4. To stop recording, press the

button. The unit

automatically creates and saves recorded files in
.MP3 format (SAM-XXXX.MP3).

5. To remove the USB device safely, press the

button once again.

After recording, a directory

named “RECORDING(DISCxxxx)”(FULL CD
RECORDING), “RECORDING”(TRACK

RECORDING), “CD COPY”(MP3/WMA/
PHOTO/DivX-RECORD DISC), “TUNER
RECORDING” or “AUX RECORDING” is
created in your USB device.

| NOTES |

Do not disconnect the USB or the AC Cord during the

recording as this may cause damage to the file.

If you disconnected the USB device during a

recording, the main unit powers off and you will not be

able to delete the recorded file from your USB device.

If this occurs, please connect the USB device to a PC

and backup the USB data to the PC first, and then

format the USB device.

When the USB memory has insufficient free space, the

system will display “NOT ENOUGH MEMORY”.

The USB device or HDD you are recording to must be

formatted in the FAT file system. The NTFS file system

is not supported.

When you use the CD high speed search function, CD

recording is not available.

Sometimes, the recording time may be longer with

some USB devices.

The equalizer and power bass is set to "OFF"

automatically and is not available during a CD

recording.

The REPEAT function is set to "OFF" automatically and

is not available during a CD recording.

You can not record the radio when searching or no

available station is found in the Tuner mode.

Note that setting the input level too loud when

recording music from an external device through

the AUX or USB channel may cause noise in the

recording. If this occurs, lower the external device’s

volume level.

The maximum TUNER/AUX recording time is 5 hours.

Up to 300MB of a video file can be copied.

Recording Speed

You can select the recording speed before recording.

1. Each time you press the CD REC SPEED

button on the remote control, the recording
speed will change as following:

NORMAL SPEED RECORD ; HIGH SPEED

RECORD

| NOTES |

When you record from the tuner or an external source,

you cannot change the recording speed.

If you select

HIGH SPEED RECORD

, sound is not

produced during the recording.

02876J MM-J430D-XA-ENG-20150918.indd 24

2016/2/3 19:09:40