Samsung 120 W 2.2Ch Micro Component MM-J430D ユーザーズマニュアル

ページ / 30
28
  English
 
Other Information 
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is 
not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and 
contact the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
•  Check the region number of the DVD. 
DVD discs purchased from abroad may not be playable.
•  CD-ROMs and DVD-ROMs cannot be played on this 
product.
• Make sure that the rating level is correct.
Playback does not start  
immediately when the  
Play/Pause button is pressed.
•  Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step motion playback.
•  Are the speakers connected properly? Is the speaker setup correctly customized?
•  Is the disc severely damaged?
The remote control does not work.
•  Is the remote control being operated within its operation range of angle and distance?
• Are the batteries drained?
•  Disc is rotating but no  
picture is produced.
•  Picture quality is poor and  
picture is shaking.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
Audio language and subtitles do not 
work.
•  Audio language and subtitles will not work if the disc does not contain them.
The menu screen does not appear even 
when the menu function is selected.
•  Are you using a disc that does not contain menus?
Aspect ratio cannot be changed.
•  You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN SCAN 
mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc jacket and then 
select the appropriate function.
•  The product is not working.  
(Example: The power goes out or the 
top panel key doesn't work or a 
strange noise is heard.)
•  The product is not working normally.
•    While “NO DISC” message appears on the display of the product, press and hold the 5 
button on the main unit for longer than  
5 seconds with no disc is inserted (reset function).
Using the RESET function will erase all stored settings.  
Do not use this unless necessary.
The rating level password has been 
forgotten.
•  While “NO DISC” message appears on the display of the product, press and hold the main unit's 
5 button for longer than 5 seconds. “
INIT” appears on the display and all settings will return 
to the default values. 
And then press the 
POWER button.
Using the RESET function will erase all stored settings.  
Do not use this unless necessary.
Can't receive radio broadcast.
• Is the antenna connected properly?
•  If the antenna's input signal is weak, install an external FM antenna in an area with good reception.
02876J MM-J430D-XA-ENG-20150918.indd   28
2016/2/3   19:09:41