Samsung HW-M360 クイック設定ガイド

ENG - 6

ENG - 7

When the subwoofer is connected, you can enjoy rich bass sound.

When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the 
subwoofer is automatically connected to the Soundbar.

 

• When auto pairing is complete, the blue indicators at the top of the subwoofer turn on.

Blue

On

Successfully connected  
(normal operation)

-

Blinking

Recovering the connection

Check if the power cable to the main
Soundbar unit is connected properly or 
wait for a while. (If blinking persists, try 
manually connecting the subwoofer.  
See page 7.)

Red

On

Standby (with the Soundbar 
main unit turned off)

Check if the power cable to the main
Soundbar unit is connected properly.

Connection failed

Connect again. See the instructions for 
manual connection on page 7.

Red and 

blue

Blinking

Malfunction

See the contact information for the 
Samsung Service Centre in the manual.

 

• Check whether the power cables for the Soundbar and subwoofer are connected properly.

 

• Make sure that the Soundbar is turned on.

1.  Press and hold ID Set on the rear of the subwoofer for at least 5 seconds.  

The red indicator on the top of the subwoofer turns off and the blue indicator blinks.

ID SET

POWER

ID SET

2.  Turn off the Soundbar.
3.  Press and hold the VoL button on the remote control for at least 5 seconds with the Soundbar 

turned off (OFF).

4.  The ID Set message appears on the display of the Soundbar for 1.3 seconds, and then disappear.

Sur

rou

nd

SOU

ND

MO

DE

Blue

toot

h

POW

ER

VOL

WOOFE

R

5.  When the blue indicator on the subwoofer blinks, turn on the Soundbar’s power by pressing  

 (Power) button on the right side of the main unit or on the remote control.

6.  When the connection is successfully established, the blue indicator on the top of the subwoofer 

stops blinking and glows continuously.

 • If the connection process fails, the blue indicator will flash continuously. Go to Step 1 and start again.