Samsung HW-M360 クイック設定ガイド

ENG - 18

ENG - 19

 

• After installing the Soundbar, you can adjust the Soundbar’s volume using the IR remote control 

that came with a Samsung TV. (If you do not want to use this function, when the Soundbar is on, 
press and hold the Surround button for 5 seconds. “off-tV reMote” appears in the Soundbar’s 
display and the function turns off.) To adjust the volume using only the Samsung TV remote control, 
press and hold the Surround button for more than 5 seconds until “SaMSunG-tV reMote” 
appears in the Soundbar display.

 

– Each time the Surround button is held for 5 seconds, the mode switches in the following order: 

“SaMSunG-tV reMote” (Default mode) → “off-tV reMote” → “aLL-tV reMote”.

 

• To adjust the Soundbar volume with the remote control that came with a TV made by a third party 

manufacturer, turn the Soundbar on, press and hold the Surround button for 5 seconds  
(“off-tV reMote” appears on the Soundbar’s display), release the Surround button, and then 
press and hold the Surround button again for more than 5 seconds. (“aLL-tV reMote” appears on 
the Soundbar’s display.)

 

– This function may not be available, depending on the remote control.

 

– For manufacturers that support this feature, refer to the FULL MANUAL  

(www.samsung.com/support).

 

– This volume control function works with IR TV remotes only. It does not work with Bluetooth 

TV remotes (remotes that require pairing).

 

• Install on a vertical wall only.

 

• Do not install in a place with high temperature or humidity.

 

• Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall 

or choose another installation point.

 

• Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster 

board, iron board, wood, etc.). If possible, fix the support screws into wall studs.

 

• Purchase wall mounting screws according to the type and thickness of the wall you want to mount 

the Soundbar on.

 

– Diameter: M5

 

– Length: 35 mm or longer recommended.

 

• Connect cables from the unit to external devices before you install the Soundbar on the wall.

 

• Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an 

electric shock.