Samsung Loa cong 5.1Ch 350W HW-J8501R クイック設定ガイド

 · 5 · English  

CONNECTING THE SUBWOOFER TO THE SOUNDBAR 
MAIN UNIT

You can enjoy rich bass tones and better sound quality by linking the subwoofer to the Soundbar main unit.

Subwoofer

Soundbar Main Unit

Sou

So

Unit

Unit

The Soundbar main unit and subwoofer should link (connect wirelessly) automatically when the Soundbar main 
unit and subwoofer are turned on. When auto-connection is complete, the blue indicator on the top of the 
subwoofer stops blinking and glows blue continuously.

 

c If the indicator on the top of the subwoofer displays in red or flashes in blue, the subwoofer has not 

automatically connected. If this occurs, follow the directions below to connect the subwoofer manually.

 

c Important: Before you begin, put the battery into the remote. See page 17 for instructions.

1.  Plug the power cords of the Soundbar main unit and subwoofer into an AC wall outlet.

2.  Press the ID SET button on the rear of the subwoofer for 5 seconds. The red indicator on the top of the 

subwoofer turns off and the blue indicator flashes rapidly.

3.  Press the 

 button on your remote control for 5 seconds while the Soundbar main unit is turned OFF.

4.  The ID SET message appears on the display of the Soundbar main unit for a short period of time, and then 

disappears.

ID SET

5.  While the subwoofer's indicator is flashing blue, press the 

 button on your remote control or on the top of 

the Soundbar main unit to turn on the Soundbar main unit.

6.  The connection is complete if the indicator on the top of the subwoofer stops flashing and glows 

continuously.

 

c  If the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.