Da-Lite Tensioned Contour Electrol 37590L プリント

製品コード
37590L
ページ / 2
SPECIFICATION DATA
S
UGGESTED SPECIFICATIONS:  __________________________  projection screen(s),  ___________________ (H) x  ___________________ (W), electrically 
operated 120 volt (60 Hz) not more than 2.4 amp. Shall have specially designed motor mounted inside the roller, to be threee wire with 
ground, quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor and an electric brake to 
prevent coasting. To have preset but adjustable limit switches to automatically stop the picture surface in the “up” and “down” 
positions. Junction box shall be integrated into the housing making it possible to install the housing and wire to the building’s electrical 
system during construction. The junction box shall contain a quick connect connector that is mounted in the housing for easy plug-in 
connection to the motorized fabric and roller assembly. The motorized fabric and roller assembly may be installed in the case at the 
factory or at a later time at the job site. The roller to be of rigid metal. Roller mounting brackets to be adjustable to allow centering or 
offsetting of the screen within the case. Screen case to be a two piece design made of extruded aluminum. Case to be finished in 
black, lightly textured powder coat. Screen fabric to be flame retardant and mildew resistant vinyl with black masking borders standard. 
Each side of fabric to have a tab guide cable system to maintain even lateral tension and hold surface flat. Bottom of fabric to be 
inserted into a custom aluminum slat bar with added weight to provide vertical tension on the screen surface. The ends of the slat to 
be protected by heavy duty plastic caps enclosing a preset adjustable mechanism for screen tensioning. Screen to include a three-
position control switch and cover plate. Screen to be listed by Underwriters’ Laboratories.
All viewing surfaces will be seamless.
All viewing surfaces are standard with black backing except Da-Tex
®
 and Dual Vision.
Audio Vision, High Contrast Audio Vision and High Contrast Cinema Perf available in sizes up to 87" x 116" in Video Format and 78" x 139" in HDTV Format.
Tensioned conTour
®
 
elecTrol
®
Automatic Electric Projection Screen Model
SuggeSted MethodS of InStallatIon
DA-LITE SCrEEN COMPANy, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: info@da-lite.com
CEILINg 
HOOk 
BRaCkET
CEILINg 
mOUNT 
BRaCkET
5
11
16
"
2
5
16
"
2
9
16
"
CaSE 
HOOk
WaLL mOUNT 
BRaCkET
6
3
8
"
STOP SCREW
WHEN OrDErING, MArK APPrOPrIATE SELECTIONS:
Select size from charts on the other side.
Select viewing surface:
o
 Da-mat
®
 
o
   High Contrast Da-mat
®
 
o
 Pearlescent  
Da-Tex
®
 (Rear)
o
  audio Vision  
High Contrast Cinema Vision
o
  Dual Vision  
High Contrast audio Vision
Cinema Vision  
o
  High Contrast Cinema Perf
 
GreenGuard
®
 and GreenGuard
®
 Children and Schools 
Certified.
Options:
o
  Single motor Low Voltage Control (LVC) external.
o
  Single motor Low Voltage Control (LVC) built-in.
o
  Wireless Remote Control for LVC.
 
o
  Radio Frequency Remote.
  o  Radio Frequency Range Extender available
 
o
  Infrared Remote.
o
  key Locking Cover Plate for 120V or LVC Switch. 
o
  Silent motor. 
o
  Silent motor with Integrated LVC. 
o
  key Operated Switch for 120V only (NOTE: Cannot be used 
with LVC).
o
  220 Volt (50 Hz) motor.
o
  Video Projector Interface Control - external.
o
  Video Projector Interface Control - built-in (adds 3¾" to case 
length of 220V motor version).
o
  SCB-100 RS-232 Serial Control Board - external.
 
o
  NET-100 Ethernet-Serial adapter
o
  SCB-100 RS-232 Serial Control Board - built in (adds 3¾" to 
length of case).
 
o
  NET-100 Ethernet-Serial adapter
o
  SCB-200 RS-232 Serial Control Board - built-in (adds 3¾" to 
length of case).
 
o
  NET-200 Ethernet-Serial adapter
 
o
  WC-200 Wall Controller
 
o
  IR-200 Infrared Remote
o
  Veneer Case Cover (Choose from seven standard veneers).
 
o
  Light Oak
 
o
  medium Oak
 o
  Natural Walnut
 
o
  Heritage Walnut
 
o
 mahogany
 
o
 Cherry
 
o
  Honey maple
o
  graphite case color.
o
  White case (black standard).