Samsung 320 W 4.1Ch Soundbar H751 ユーザーズマニュアル

26

  

+  Updating with USB

  Samsung may offer updates for the Soundbar's system 
firmware in the future.

  If an update is offered, you can update the firmware by 
connecting a USB device with the firmware update 
stored on it to the USB port on your Soundbar.

  Note that if there are multiple update files, you must load 
them onto the USB device singly and use them to 
update the firmware one file at a time.

  Please visit Samsung.com or contact the Samsung call 
center to receive more information about downloading 
updates files.

1.    While the Soundbar is turned off, connect the USB 

storage device that contains the updating firmware 
to the Soundbar’s USB port.

2.    Turn on the Soundbar UPDATE appears on the 

display and updating begins within 3 minutes.

•    Upon completion of updating, the Soundbar 

turns off and on automatically.

1.   Turn off the Soundbar, connect the USB storage 

device that contains update files to the Soundbar’s 
USB port.

2.   Disconnect the power cord, reconnect it and turn it 

on.

  

  

 

●   Updating firmware may not work properly if 

audio files supported by the Soundbar are 
stored in the USB storage device.

●   Do not disconnect the power or remove the 

USB device while updates are being applied. 
The main unit will turn off automatically after 
completing the firmware update.

●   After reset, all settings are reset to their 

factory default settings. We recommend you 
write down your settings so that you can 
easily reset them after the update. 
Note that updating firmware resets 
subwoofer connection too. If connection to 
the subwoofer is not established 
automatically after resetting, refer to page 13. 
If the firmware fails to update, we 
recommend formatting the USB device in 
FAT16 and trying again.

●   Do not format the USB device in the NTFS 

format. The Soundbar does not support the 
NTFS file system.

●   Depending on the manufacturer, some USB 

devices may not be supported.

+  Auto update

 Even when the Soundbar is turned off, the Soundbar will 
automatically check latest software version and continue 
to update if it was connected to the Internet.

  

 

●  The Soundbar is configured to run auto 

update by default.

●  To use auto update function, the Soundbar 

must be connected to the Internet.

●  Wi-Fi connection to the Soundbar will be 

terminated if its power cord was 
disconnected or the power was cut off. Turn 
on the Soundbar and reconnect.

HW-H750_H751_XY_ENG_141023.indd   26

HW-H750_H751_XY_ENG_141023.indd   26

2014-10-23     5:36:22

2014-10-23     5:36:22