Samsung 320W 4.1Ch Curved Soundbar J7501R ユーザーズマニュアル

If you have connected the main unit to a TV with a digital optical cable, you can set the Auto Power function ON 

to have the Soundbar turn on automatically when you turn the TV on.

AUTO POWER LINK

Display

ON

OFF

1.  Connect the Soundbar and a TV with a digital optical cable (not supplied).
2.  Press the 

 button on the main unit’s top panel or the SOURCE button on the remote control to select the 

D.IN mode.

3.  Press the Anynet+ button on the remote control to toggle the Auto Power Link function on and off.

 

●

Depending on the connected device, Auto Power Link may not function.

You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the  
TV SoundConnect function.

1.  Turn on the TV and Soundbar.
2.  Press the 

 button on the main unit’s top panel or the SOURCE button on the remote control to select the TV 

mode.

3.  On the TV, a message asking whether to enable the TV SoundConnect function appears.
4.  Select <Yes> using the TV's remote control to finish connecting the TV and Soundbar.

 

●

If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select 

Add New Device, and set Add New Device to ON. Then, try again.

●

Switching the Soundbar’s mode from TV to another mode automatically terminates TV SoundConnect.

●

To connect the Soundbar to another TV, the existing connection must be terminated.

●

To terminate the existing connection, press and hold the p button on the remote for 5 seconds or switch 

to another mode. To connect to the other TV, follow Steps 1 through 4 above.