Samsung BD-J5500E ユーザーズマニュアル
NotES
✎
Be sure to select the correct Digital
■
Output or you will hear no sound or
just loud noise.
If the HDMI device (AV receiver, TV)
just loud noise.
If the HDMI device (AV receiver, TV)
■
is not compatible with compressed
formats (Dolby Digital, DTS), the
audio signal outputs as PCM.
Regular DVDs do not have
formats (Dolby Digital, DTS), the
audio signal outputs as PCM.
Regular DVDs do not have
■
BONUSVIEW audio and Navigation
Sound Effects.
Some Blu-ray Discs do not have
Sound Effects.
Some Blu-ray Discs do not have
■
BONUSVIEW audio and Navigation
Sound Effects.
If you play MPEG audio soundtracks,
Sound Effects.
If you play MPEG audio soundtracks,
■
the audio signal outputs as PCM
regardless of your Digital Output
selections (PCM or Bitstream).
If your TV is not compatible with
regardless of your Digital Output
selections (PCM or Bitstream).
If your TV is not compatible with
■
compressed multi-channel formats
(Dolby Digital, DTS), the player may
output PCM 2ch downmixed audio
even though you selected Bitstream
(either Re-encoded or Unprocessed)
in the setup menu.
If your TV is not compatible with
(Dolby Digital, DTS), the player may
output PCM 2ch downmixed audio
even though you selected Bitstream
(either Re-encoded or Unprocessed)
in the setup menu.
If your TV is not compatible with
■
PCM sampling rates over 48kHz,
the player may output 48kHz
downsampled PCM audio even
though you set PCM Downsampling
to off.
the player may output 48kHz
downsampled PCM audio even
though you set PCM Downsampling
to off.
pCM downsampling
Lets you choose to have 96KHz PCM
signals downsampled to 48KHz before
they are outputted to an amplifier. Choose
on if your amplifier or receiver is not
signals downsampled to 48KHz before
they are outputted to an amplifier. Choose
on if your amplifier or receiver is not
compatible with a 96KHz signal.
Wired Network Settings
In the Home menu, press the
11
▲▼◀▶
buttons to select Settings, and then
press the v button.
Press the ▲▼ buttons to select
Press the ▲▼ buttons to select
21
Network, and then press the v
button.
Press the ▲▼ buttons to select
Press the ▲▼ buttons to select
31
Wired
Network Settings, and then press
the v button. The Wired Network
Settings screen appears.
picture
Sound
Sound
Network
System
Language
Security
General
Support
Language
Security
General
Support
Settings
Wired Network Settings
Internet protocol Setup : Auto
▶
Ip Address
: 1
1
1
1
Subnet Mask
: 1
1
1
1
Gateway
: 1
1
1
1
dNS
: Auto
dNS Server
:
1
1
1
1
> Move
" Select ' Return
In the Internet Protocol Setup field,
41
select Auto if it is not selected. (Press
v to select Auto, and then press v.)
The Auto Function acquires and fills in
v to select Auto, and then press v.)
The Auto Function acquires and fills in
51
the values for Ip Address, Subnet Mask,
etc., automatically.
NotES
✎
This process can take up to five
■
minutes.
After the Network Function has
61
acquired 6. the network values, press
the REtuRN button.
Select
Select
71
Network test, and then press v
to ensure the player has connected to
your network.
When the Network Test is complete,
When the Network Test is complete,
81
press the REtuRN twice to return to
the Main Menu.
If the Network Function does not
91
acquire the network values, go to the
directions for Manual Setup.
Manual Network Setup
Before you start manual network setup,
you need the network setting values.
you need the network setting values.
To get the network setting values, contact
your ISP (Internet Service Provider) or your
network administrator.
your ISP (Internet Service Provider) or your
network administrator.
to enter the Network Settings into your
player, follow these steps:
player, follow these steps:
In the Home menu, press the
11
▲▼◀▶
buttons to select Settings, and then
press the v button.
Press the ▲▼ buttons to select
Press the ▲▼ buttons to select
21
Network, and then press the v
button.
Press the ▲▼ buttons to select
Press the ▲▼ buttons to select
31
Wired
Network Settings, and then press
the v button. The Wired Network
Settings screen appears.
Select the Internet Protocol Setup field,
Select the Internet Protocol Setup field,
41
and then press the v button.
Press the ▲▼ buttons to select
Press the ▲▼ buttons to select
51
Manual, and then press the v button.
Press the ▼ button to go to the first
Press the ▼ button to go to the first
61
entry field (IP Address).
Use the number buttons on your
Use the number buttons on your
71
remote to enter numbers.
When done with each field, use the
When done with each field, use the
81
▶
button to move to the next field. You
can also use the other arrow buttons
to move up, down, and back.
Enter the
can also use the other arrow buttons
to move up, down, and back.
Enter the
91
Ip Address, Subnet Mask,
and Gateway values in the same way.
Press the ▼ button to go to DNS.
Press the ▼ button to go to DNS.
111
dynamic Range Control
Lets you apply dynamic range control to
Dolby Digital, Dolby Digital Plus, and Dolby
TrueHD audio.
Dolby Digital, Dolby Digital Plus, and Dolby
TrueHD audio.
Auto
●
: Automatically controls the
dynamic range of Dolby TrueHD audio,
based on information in the Dolby
TrueHD soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
off
based on information in the Dolby
TrueHD soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
off
●
: Leaves the dynamic range
uncompressed, letting you hear the original
sound.
on
sound.
on
●
: Turns dynamic range control on for
all three Dolby formats. Quieter sounds
are made louder and the volume of loud
sounds is reduced.
are made louder and the volume of loud
sounds is reduced.
downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.
method that is compatible with your stereo
system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.
Network Settings
Please contact your ISP to find out if
your IP address is static or dynamic. If it is
dynamic - and most are - we recommend
using the Auto procedure for network
setup. This is easiest and will work in the
majority of cases. If it is static, you must
use the manual set up procedure.
Network setup directions start below.
Network setup directions start below.
NotES
✎
This unit can only be connected to a
■
Network via a wired connection.
12