Samsung HW-K950 ユーザーズマニュアル

Push the button up or down to adjust the volume of the subwoofer to -12 or 

-6 to +6. 

Pressing the button reverts the subwoofer volume to level 0.

VOL
Push the button up or down to adjust the volume.
Mute

Press the VOL button to mute the sound. Press it again to unmute the sound.

Press to select treBLe, BaSS, or aUDiO SynC. Then, use the  

Up/Down buttons to adjust the treBLe or BaSS volume from -3 ~ +3.
Press and hold the   (Sound Control) button for about 5 seconds to 

adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 

2.5KHz, 5KHz, and 10KHz are selectable (Left/right) and each can be 

adjusted to a setting between -6 ~ +6 (Up/Down).
If the Soundbar is connected to a digital TV and the video appears out of 

sync with the audio, press the   (Sound Control) button to sync the audio 

with the video. Use the Up/Down buttons to set the audio delay between  

0 ms ~ 300 ms. In BT mode, the audio Sync function may not available.

1.  Press and hold the 

 SOUnD button for more than 5 seconds while the Soundbar is turned on.

2.  "on - TV remoTe" appears on the Soundbar's display.
3.  In the TV's menu, set the TV speaker to external speaker.

 

●

not available in tV arC, Bt, HDMi1 and HDMi2 modes. (available only in D.in (optical) and aUX 

modes)

●

on the TV remote control, only the volume and mute buttons are available. other buttons are disabled.

●

TV menus differ by manufacturer and model. refer to the TV's user manual for further information.

●

manufacturers supporting this function: 

- VIZIo, LG, Sony, Sharp, PHILIPS, PanaSonIC, ToSHIBa, GrUnDIG, Hisense, rCa 

- This function may not be compatible with your TV's remote depending on the remote control's manufacturer.

●

To turn off this function, press the 

 SOUnD button for 5 seconds. 

"off - TV remoTe" appears on the Soundbar's display.