Samsung HW-J250 ユーザーズマニュアル

ページ / 25
13
12
ENG
CONNECTIONS
INSTALLING THE BRACKET WITHOUT REFERRING TO THE 
WALL-MOUNT INSTALLATION GUIDE
5 cm or more
5 cm or more
16 cm
17.5 cm
Minimum 32.8 ~ 33.5cm
1.  Place Wall Mount L on the desired wall surface parallel to the floor as shown above. Mark the 
location of the screw holes on the wall. Drill holes for the screws at the places you have marked.
2.  Match the screw holes on Wall Mount L to the screw holes on the wall, and then screw one screw 
through the hole in its right end. Tighten the screw until it is firmly fixed to the wall.
3.  Place Wall Mount R on the desired wall surface parallel to the floor and aligned with Wall Mount L as shown 
above. Mark the location of the screw holes on the wall. Drill holes for the screws at the places you have 
marked.
4.  Match the screw holes on Wall Mount R to the screw holes on the wall, and then screw one screw 
through the hole in its right end. Tighten the screw until it is firmly fixed to the wall.
 
If you are mounting the Wall Mounts beneath the TV, make sure to position the mounts 5 mm 
or more below the TV and to align the mounts with the center of the TV as shown above.
5.  Insert screws through the remaining holes, and then tighten.
HW-J250_XU_AH68-02983G-00_20161021.indd   13
2016/11/23   9:07:09