Samsung HW-J355 ユーザーズマニュアル

FUNCTIONS

Samsung may offer updates for the Soundbar's 
system firmware in the future.

If an update is offered, you can update the firmware 
by connecting a USB device with the firmware 
update stored on it to the USB port on your 
Soundbar.

Note that if there are multiple update files, you must 
load them onto the USB device singly and use them 
to update the firmware one file at a time.

Please visit samsung.com or contact the Samsung 
call center to receive more information about 
downloading updates files.

 

 

●

The product has the DUAL BOOT 
function, if the firmware fails to update, 
you can update the firmware again.

 

 

●

Insert a USB device containing the 
firmware update into the USB port on the 
main unit.

 

●

Updating firmware may not work properly 
if audio files supported by the Soundbar 
are stored in the USB storage device.

 

●

Do not disconnect the power or remove 
the USB device while updates are being 
applied. The main unit will turn off 
automatically after completing the 
firmware update.

 

●

After reset, all settings are reset to their 
factory default settings. We recommend 
you write down your settings so that you 
can easily reset them after the update. 
If the firmware fails to update, we 
recommend formatting the USB device in 
FAT16 and trying again.

 

●

Once the software update is completed, 
turn off the product and then press and 
hold the ( p ) button on the remote 
control for more than 5 seconds. “INIT” 
appears on the display and the unit is 
powered off. The upgrade is complete.

 

●

Do not format the USB device in the NTFS 
format. The Soundbar does not support 
the NTFS file system.

 

●

Depending on the manufacturer, some 
USB devices may not be supported.

HW-J355_XU_AH68-02984E_ENG-00-20161123.indd   20

2016/11/25   11:29:35