Samsung HW-J355 ユーザーズマニュアル
9
8
ENG
REMOTE CONTROL
REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
WOOFER (* Use the [,] button to adjust the Volume.)
You can control the woofer volume.
Press the [, ] button to increase or decrease the subwoofer volume.
You can select SW (-12, -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6).
You can control the woofer volume.
Press the [, ] button to increase or decrease the subwoofer volume.
You can select SW (-12, -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6).
REPEAT
Press to set the REPEAT function during music playback from a USB
device.
OFF-REPEAT : Cancels Repeat Playback.
TRACK-REPEAT : Repeatedly play a track.
ALL-REPEAT : Repeatedly play all tracks.
RANDOM-REPEAT : Plays tracks in random order. (A track that has
already been played may be played again.)
Press to set the REPEAT function during music playback from a USB
device.
OFF-REPEAT : Cancels Repeat Playback.
TRACK-REPEAT : Repeatedly play a track.
ALL-REPEAT : Repeatedly play all tracks.
RANDOM-REPEAT : Plays tracks in random order. (A track that has
already been played may be played again.)
MUTE
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
SOURCE
Press to select a source connected to the Soundbar.
Press to select a source connected to the Soundbar.
Skip Forward
If there is more than one file on the device you are playing, and you
press the ] button, the next file is selected.
If there is more than one file on the device you are playing, and you
press the ] button, the next file is selected.
●
Soundbar is a Samsung proprietary name.
●
Operate the TV using the TV's remote control.
AUTO POWER
Press the AUTO POWER button. Each time the button is pressed, the
selection changes as follows : OFF-POWER LINK ON-POWER LINK.
ON-POWER LINK: Synchronizes the Soundbar to a connected Optical
source via the Optical jack so it turns on automatically when you turn on
your TV.
Press the AUTO POWER button. Each time the button is pressed, the
selection changes as follows : OFF-POWER LINK ON-POWER LINK.
ON-POWER LINK: Synchronizes the Soundbar to a connected Optical
source via the Optical jack so it turns on automatically when you turn on
your TV.
SOUND CONTROL (*Use the [,] buttons to adjust level.)
Press to select TREBLE, BASS, or AUDIO SYNC. Then, use the [,]
buttons to adjust the Treble, Bass volume from -6 to +6.
Press to select TREBLE, BASS, or AUDIO SYNC. Then, use the [,]
buttons to adjust the Treble, Bass volume from -6 to +6.
If the Soundbar is connected to a digital TV and the video appears out
of sync with the audio, press the SOUND CONTROL button to sync the
of sync with the audio, press the SOUND CONTROL button to sync the
audio with the video. Use the [,] buttons to set the audio delay
between 0 ms and 300 ms. In USB mode, TV mode, and BT mode, the
Audio Sync function may not work.
between 0 ms and 300 ms. In USB mode, TV mode, and BT mode, the
Audio Sync function may not work.
Press and hold the SOUND CONTROL button for about 5 seconds to
adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz,
1.2KHz, 2.5KHz, 5KHz and 10KHz are selectable and each can be
adjusted to a setting between -6 and +6.
1.2KHz, 2.5KHz, 5KHz and 10KHz are selectable and each can be
adjusted to a setting between -6 and +6.
HW-J355_XU_AH68-02984E_ENG-00-20161123.indd 9
2016/11/25 11:29:27