Samsung SHR-2040P ユーザーズマニュアル
English
1. There are two USB connecting ports on the front and back of SHR-2040/2041/2042.
2. USB Hard Disk, USB CD/DVD, and USB Memory are connected through the front and back
2. USB Hard Disk, USB CD/DVD, and USB Memory are connected through the front and back
ports of SHR-2040/2041/2042.
3. Only one USB device can be connected with each USB connecting port.
4. If the USB HDD is connected to the system, it should be detected and set through
4. If the USB HDD is connected to the system, it should be detected and set through
Menu - System - HDD setup before the operation.
5. It supplies the function of HOT PLUG, which connects/removes the USB device, during the
system operation.
Caution
Caution
- USB port on the front and back of SHR-2040/2041/2042 cannot be connected to same kinds
of USB device. (For example, the case is that 2 CD-RW devices or 2 USB Memories are used
by connection with the front and back of system.)
by connection with the front and back of system.)
- If you use the USB Memory on SHR-2040/2041/2042, it should be composed of the format
being supported by SHR-2040/2041/2042. Although you format it with FAT32 format on PC,
it will be re-formatted, in case of (when) connecting with SHR-2040/2041/2042.
it will be re-formatted, in case of (when) connecting with SHR-2040/2041/2042.
Caution
Caution
- The hard disk of USB device should be set to Master.
Note
Note
See 5-8 System (HDD Setup) of User’s Manual.
SHR-2040/2041/2042 USER’S MANUAL
3-5
3
Connecting the USB
SHR-2040/2041/2042-ENG-1 6/21/07 4:53 PM Page 3-5