Samsung SHR-2040P ユーザーズマニュアル
English
5-4
Password
●
The Default Password is 4321.
●
New Password
This is used to change the system password inside SHR-2160/2162/2080/2082.
You are allowed to create a password up to 8 digits. Press the “Enter” key and a
channel button from 1~9,10(operates as 0) at the left. Press the “Enter” key after
change to move to “New Password Confirm”.
This is used to change the system password inside SHR-2160/2162/2080/2082.
You are allowed to create a password up to 8 digits. Press the “Enter” key and a
channel button from 1~9,10(operates as 0) at the left. Press the “Enter” key after
change to move to “New Password Confirm”.
●
New Password Confirm
This confirms a new password. You shall be obliged to input New Password in
the above row first. Without New Password input, New Password Confirm input
has no effect.
This confirms a new password. You shall be obliged to input New Password in
the above row first. Without New Password input, New Password Confirm input
has no effect.
●
Password Lock
If it is set to On, a pop-up window for user validation (You have to fill in the Setup,
ID, and Password fields.) appears every time you select a menu. If it is set to Off,
you can enter menus without entering the password.
If it is set to On, a pop-up window for user validation (You have to fill in the Setup,
ID, and Password fields.) appears every time you select a menu. If it is set to Off,
you can enter menus without entering the password.
●
Record Lock
If the Record Lock is set to On, a pop-up window, asking for the password appears
while disabling the recording.
If the Record Lock is set to On, a pop-up window, asking for the password appears
while disabling the recording.
●
User Authority
You can select any of Search, Backup, PTZ, and Shutdown. As an example, if the
user has no access right for Search, the user cannot enter the Search menu.
You can select any of Search, Backup, PTZ, and Shutdown. As an example, if the
user has no access right for Search, the user cannot enter the Search menu.
●
All Key Lock On
If you select this, the system will enter the live mode immediately. If you press any
button on the front panel or remote control, the password input window appears. If
the correct password is input, the lock function is deactivated.
If you select this, the system will enter the live mode immediately. If you press any
button on the front panel or remote control, the password input window appears. If
the correct password is input, the lock function is deactivated.
The factory default password for Admin and user privileges is "4321." In case of user
privilege, you can select any of 5 users (User1 to User5) and assign user access
rights for the selected user. If you press Setup in User Authority, all the access rights
are selected.
privilege, you can select any of 5 users (User1 to User5) and assign user access
rights for the selected user. If you press Setup in User Authority, all the access rights
are selected.
Note
Note
[All Key Lock On]
If you select this, the system immediately switches to the live mode and all buttons are locked.
If you select this, the system immediately switches to the live mode and all buttons are locked.
SHR-2040/2041/2042-ENG-1 6/21/07 4:53 PM Page 5-4