Samsung SHR-2040P ユーザーズマニュアル

English

3

●

Event Monitoring

It is possible to set to Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous.
① Off : Event Monitoring does not operate to turn to the screen where an event occurs.
➁ 3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto

Sequence mode.

➂ Continuous : The Event Monitoring screen remains alive until you press the “Alarm” 

button in the front to cancel the screen manually.

●

OSG Display

① Date : The date is displayed on the screen when it is On, and not displayed when it is Off.
➁ Time : The time is displayed on the screen when it is On, and not displayed when it is Off.
➂ Cam name : The Cam name is displayed on the screen when it is on, and not displayed

when it is off. 

➃ Status : Audio/Ptz is displayed on the screen when it is on, and not displayed when it is off.

●

Spot Out Channel

Spot Out channel is used to let one of two monitors monitor a channel, focusing on it. 

Spot Out channel supplies two functions, continuous monitoring of only one channel and

Auto Sequence to display all the channels one by one.
① Auto Sequence setup ranges from Ch1 to Ch 4.
➁ In the Auto Sequence mode, Spot Out channels are displayed in turn.
➂ Duration time for Auto Sequence is as same as set for Camera setup.

●

Spot Out Event Monitor

Sets if event monitoring will be executed for Spot Out channels. 
① Off : The event monitoring dose not operate in the Spot Out channel.
➁ 3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto

Sequence mode.

➂ Continuous : Once scrolled down, the screen remains displayed until you delete “Alarm”

LED in the front manually.

SHR-2040/2041/2042-ENG-1  6/21/07  4:53 PM  Page 5-16