Samsung HW-M4501 ユーザーズマニュアル

ENG - 28

If an update is offered, you can update the 
firmware by connecting a USB device with the 
firmware update stored on it to the USB port on 
your Soundbar.
For more information about how to download 
update files, go to the Samsung Electronics 
website at (www.samsung.com  Support).  
Then, enter or select the model of your Soundbar, 
select Software & Apps, and then Downloads.  
The option name can vary.

1.  Follow the steps below to download the 

product software: 
Go to the Samsung website at  
(samsung.com) 



 search for the model name 

- select the customer support option (the 
option name is subject to change)

2.  Save the downloaded software to a USB 

stick and select “Extract Here” to unzip the 
folder.

3.  Turn off the Soundbar and connect the USB 

stick containing the software update to the 
USB port.

4.  Disconnect the power cord, reconnect it, and 

then turn on the Soundbar.

5.  Turn on the Soundbar. Within 3 minutes, 

“UPDATE” is displayed and updating begins.

6.  When the update finishes, the Soundbar 

turns off. Press the 

 button on the remote 

control for 5 seconds. “INIT” appears on the 
display and then the Soundbar turns off.  
The update is complete.

 

• This product has a DUAL BOOT function. 

If the firmware fails to update, you can 
update the firmware again.