Samsung SCC-B5394P ユーザーズマニュアル
10
11
Components of your camera
Your camera has the following components:
1. Dome cover: Covers the inner cover, lens, and main
body to protect them.
2. Cover screw: Use it to assemble or disassemble both
dome cover and case.
3. Inner cover: Covers the main body to protect it.
4. Wing locker: Push a long thin screwdriver into its
narrow spot and press it outward when you want to
remove the inner cover.
5. Main body: Includes a lens, a switch board, a PCB
board, screws, and such.
6. Screws for assembly and disassembly: Using
these 2 screws, the Main body is closely connected to
the Case.
7. Hooker: By pulling the left/right levers in the arrow
direction, the Main body can be detached from the
Case.
8. Case: Used as a ceiling or wall fixture. It is fixed using
four screws provided in the package.
9. Zoom lever: Using this lever, the lens zoom can be
adjusted and fixed.
10. Focus lever: Using this lever, the lens focus can be
adjusted and fixed.
11. Tilt fixing screw: Using this screw, the slope of the
lens can be adjusted and fixed.
12. Switch board: Includes two kinds of control switches
such as function switches and phase-control switches.
The board has eight function switches in the middle
and two phase-control buttons on each side of the
function switch area.
13. Cable: Connect the Video connector to BNC cable
and Power connector to power adapter.
1
2
4
Lens
9 0
!
@
3
8
#
Video connector
Power connector
Power connector
5
6
6
7
7
AB68-00688C.indb 10
2007-07-06 ｿﾀﾈﾄ 2:30:48