Samsung SCC-B5394P ユーザーズマニュアル

❚

When the camera is fixed on the ceiling, you can 

adjust the camera viewing angle. You can rotate 

your camera leftward or rightward (Panning), and 

can change the slope of your camera upward or 

downward (Tilting). 
In case of panning, the rotation limit of your camera 

is set to 355 degree (100 degree clockwise and 255 

degree counterclockwise). The rotation is stopped 

by the 

Stopper inside of the camera. For panning 

control, first unfasten two screws located on the 

bottom and rotate in the direction you want, and then 

fasten them to fix the camera. 
In case of tilting, you can change the slope of your 

camera from zero to 90 degree. However if the slope 

angle is under 17 degree, you can encounter a partial image hide problem. To fix the location 

after adjusting the tilting angle, use the 

Tilt fixing screws. 

To adjust the focus and zoom of your camera, use the 

Zoom lever and Focus lever. When you 

install the camera on the inclined ceiling or wall, you can rotate the camera lens to see a correct 

direction image.

AB68-00688C.indb   19

2007-07-06   ｿﾀﾈﾄ 2:30:59