Samsung 4.1 Ch Soundbar J480 ユーザーズマニュアル
25
24
ENG
TROUBLESHOOTING
TROUBLESHOOTING
Before requesting service, please check the following.
The unit will not turn on.
• Is the power cord plugged into the outlet?
¼
Connect the power plug to the outlet.
A function does not work when the button is pressed.
• Is there static electricity in the air?
¼
Disconnect the power plug and connect it again.
Sound is not produced.
• Is the Mute function on?
• Is the volume set to minimum?
• Is the volume set to minimum?
¼
Press the
(Mute) button to cancel the Mute
function.
¼
Adjust the Volume.
The remote control does not work.
• Are the batteries drained?
• Is the distance between the remote control and main
• Is the distance between the remote control and main
unit too far?
¼
Replace with new batteries.
¼
Move closer to the unit.
The TV SoundConnect (TV pairing) failed.
• Does your TV support TV SoundConnect?
• Is your TV firmware the latest version?
• Does an error occur when connecting?
• Reset the TV mode and connect again.
• Does an error occur when connecting?
• Reset the TV mode and connect again.
¼
TV SoundConnect is supported by some Samsung
TVs released from 2012 on. Check your TV to see if it
supports TV SoundConnect.
¼
Update your TV with the latest firmware.
¼
Contact the Samsung Call Centre.
¼
Press and hold the p button for 5 seconds to reset
the TV SoundConnect connection.
The red LED on the subwoofer blinks and the subwoofer is not producing sound.
• Your subwoofer may not be connected to the
main body of the product.
¼
Try to connect your subwoofer again. (See Page 14)
The subwoofer drones and vibrates noticeably.
• Try to adjust the vibration of your subwoofer.
¼
Press the
WOOFER button on your remote control to
adjust the subwoofer's volume level (between SW-12
and SW+6. See page 10.) .
TROUBLESHOOTING
HW-J470 EN ENG-0311.indd 25
2015/3/24 9:04:36