Samsung Rugby III ユーザーズマニュアル
To create a new Network Profile, use the following
parameters:
parameters:
•
Set Name: Profile name.
•
Access name: Access point name.
•
Auth type: Type of authentication used for this WAP connection:
None, Normal, or Secure.
•
User ID: User ID required to connect to the network.
•
Password: User password required to connect to the network.
•
Protocol: Connection protocol used by the WAP browser: WAP,
HTTP, or Other.
•
Home URL: URL address of the page to use as your homepage.
•
Gateway Address (WAP only): Gateway Address, which only
appears when the Protocol is set to WAP.
•
Secure connection (WAP only): Select On or Off depending on
whether you have a secure connection. This option only appears
when the Protocol is set to WAP.
•
Proxy Address (HTTP only): Set the proxy server address.
•
Linger Time (sec.): Time period (in seconds) after which the
network is disconnected if there is no new data traffic.
•
Advanced: Configure some of the IP-specific information: Static
IP, Static DNS, Server information, and Traffic Class. Highlight this
option and press Edit to access the following options:
–
Static IP: Specify if you want to manually enter an IP address.
Remove the check mark if you want the server to automatically
assign the IP address.
Remove the check mark if you want the server to automatically
assign the IP address.
–
Local phone IP: Configure the local phone IP address.
–
Static DNS: Specify if you want to manually enter the Domain
Name Server (DNS) address. Remove the check mark if you
want the server to automatically assign the address.
Name Server (DNS) address. Remove the check mark if you
want the server to automatically assign the address.
–
Server 1/Server 2: The Domain Name Server (DNS) addresses.
–
Traffic class: Select the traffic class, press Edit, select a Traffic
Class (Subscribed, Conversation, Streaming, Interactive, or
Background) and press OK.
Class (Subscribed, Conversation, Streaming, Interactive, or
Background) and press OK.
Note: The WAP settings may vary depending on the service
provider.
Changing Your Settings
138