Samsung Galaxy View 18.4 ユーザーズマニュアル

ページ / 84
Assemble Your Device 
Getting Started
Assemble Your Device  
This section helps you to 
assemble your device. 
Install an Optional Memory Card 
You can install an optional microSD or microSDHC 
memory card (not included) to expand available 
memory space. 
Note: A memory card can be installed at any time; it 
is not necessary to install it prior to using the device. 
For more information on installing a memory card, 
see 
Charge the Battery 
Your device is powered by a rechargeable, standard 
Li-Ion battery. A Wall charger is included with the 
device for charging the battery. 
The battery comes partially charged. A fully 
discharged battery requires up to four hours of 
charge time. You can use the device while charging. 
Caution: Use only Samsung-approved charging 
devices and batteries. Samsung accessories are 
designed to maximize battery life. Using other 
accessories may invalidate your warranty and may 
cause damage. 
Note: The USB port does not support charging. 
1. Insert the charger into the DC jack. 
2.  Plug the charging head into a standard AC power 
outlet. 
3.  When charging is complete, unplug the charging 
head from the power outlet and remove the 
charger from the DC jack. 
When to Charge the Battery 
When the battery is low and only a few minutes of 
operation remain, the device sounds a warning tone 
at regular intervals. 
In this condition, your device conserves its 
remaining battery power by dimming the screen. 
When the battery level becomes too low, the device 
automatically turns off.
►  For a quick check of your battery level, view 
the battery charge indicator located in the 
upper-right corner of your device’s display. A 
solid color
 indicates a full charge. 
You can also choose to display a percentage 
value. Viewing a percentage value can provide 
a better idea of the remaining charge on the 
battery. For more information, see 
 ( )