Eltako ER12-002-8..230V UC 22002601 プリント

GB

Switching relays
ER12-001-8..230 V UC,
ER12-002-8..230 V UC

ER12-001:
1 change over contact potential free
16 A/250 V AC.
Safe disconnection to VDE 0106, Part 101;
therefore, these devices can also be used as
coupling relays.
ER12-002:
2 change over contacts potential free
16 A/250 V AC.
Incandescent lamp load up to 2000 W. 
No standby loss.
Modular device for DIN-EN 60715 TH35 
rail mounting.
1 module = 18 mm wide, 58 mm deep.
State-of-the-art hybrid technology combines
advantages of nonwearing electronic control
with high capacity of special relays.
Universal control voltage 8 to 230 V UC.
Low switching noise. Contact position 
indicator with LED. 
Integrated free-wheeling anti-surge diode
(A1= +, A2 = -).
By using a bistable relay coil power loss 
and heating is avoided even in the on mode.
The relay contact can be open or closed
when putting into operation. It will be 
synchronised at first operation.

22 001 601 - 1 

22 002 601 - 1

Control voltage

8..230 V UC

Rated switching capacity

16 A /250V AC

Incandescent lamp load and

2000 W

halogen lamp load

1)

230 V

Fluorescent lamp load with KVG

1000 VA

in lead-lag circuit or non compensated 

Fluorescent lamps with KVG

500 VA

shunt-compensated or wih EVG

Compact fluorescent lamp with

I on <

_ 70 A /

EVG and energy saving lamps

10 ms

2)

Standby loss (activ power)

_

1)

For lamps with 150 W max

2)

For electronic ballast gears a 40fold inrush
current has to be calculated. For steady loads of 
1200 W use the current-limiting relay SBR12.

The strain relief clamps of the 
terminals must be closed, that 
means the screws must be tightened
for testing the function of the device.
The terminals are open ex works.

01/2009 Specifications subject to change.

!