Samsung Galaxy Tab 7.0 ユーザーズマニュアル
66
Scanning and Connecting to a Wi-Fi Network
When you turn on Wi-Fi, your device searches for available Wi-Fi
connections, then displays them on screen.
connections, then displays them on screen.
1.
From any screen, sweep your finger downward from the
top to display the Notification Panel.
2.
Touch Wi-Fi to turn Wi-Fi On. Your device automatically
scans for available Wiress Access Points.
3.
When the scan is complete, touch a Wi-Fi network to
connect. If the Wi-Fi network is open, your device will
automatically connect. If the Wi-Fi network is secured,
enter the password at the prompt to connect.
Note: For some connections, you may need to launch the Browser to
complete the Wi-Fi login process on the displayed web page.
Adding a Wi-Fi Network Manually
1.
From a Home screen, touch Menu
➔
Settings
➔
Wireless and network
➔
Wi-Fi settings.
2.
Touch Wi-Fi to turn Wi-Fi On.
3.
Touch Add Wi-Fi Network, then enter information about the
network:
• Network SSID: Enter the name of the Wi-Fi Wireless Access Point.
• Security: Select the type of security used by the WAP.
• Password: If the WAP is secured, enter the password or hex key.
Note: Depending on the Security protocol used by the Wireless Access Point,
additional network information may be required.
4.
Touch Save to save the settings.