Samsung 2017 Soundbar w/ Wireless Subwoofer クイック設定ガイド

ENG - 10

ENG - 11

 

• If “tV arC” does not appear in the display window of the Soundbar main unit, confirm that the 

cable is connected to the correct port.

 

• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.

When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.

 

• Only one TV can be connected at a time.

1.  Press the 

 (Source) button on the right side panel or on the remote control, and then select 

“Bt”.

2.  Change “Bt” to “Bt PaIrInG”.

 

• If “Bt reaDy” appears, press and hold the 

 (Source) button on the right side panel of the 

Soundbar or on the remote control for more than 5 seconds to display “Bt PaIrInG”.

3.  Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)
4.  Select “[aV] Samsung Soundbar Mxxx M-Series” from the list on TV’s screen. 

An available Soundbar is indicated with “need Pairing” or “Paired” on the TV Bluetooth device list. 
To connect to the Soundbar, select the message and establish a connection.

 

• When the TV is connected, [tV name] → “Bt” appears on the Soundbar’s front display.

5.  You can now hear TV sound from the Soundbar.

 

• If the previously connected Soundbar listing (e.g. “[aV] Samsung Soundbar Mxxx M-Series”) 

appears in the list, delete it.

 

• In “Bt” mode, press and hold the 

 (Source) button for more than 5 seconds on the right side of 

the Soundbar or on the remote control to switch to “Bt PaIrInG” mode.  
Then, select “[aV] Samsung Soundbar Mxxx M-Series” from the TV’s search list.

 

• Bt reaDy : In this mode, you can search for previously connected TVs or connect to the Soundbar 

from a previously connected mobile device.

 

• Bt PaIrInG : In this mode, you can connect to a new device. (While in “Bt” mode, press and hold the 

 (Source) button for more than 5 seconds on the right side of the Soundbar or on the remote 

control.)

 

• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

 

• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the 

Soundbar and the Bluetooth device exceeds 32.8 ft.

 

• The Soundbar automatically turns off after 5 minutes in the Ready state.

 

• The Soundbar may not perform Bluetooth search or connection correctly under the following 

circumstances:

 

– If there is a strong electrical field around the Soundbar.

 

– If several Bluetooth devices are simultaneously paired with the Soundbar.

 

– If the Bluetooth device is turned off, not in place, or malfunctions.

 

• Electronic devices may cause radio interference. Devices that generate electromagnetic waves 

must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

Press the 

 (Source) button on the right side panel or on the remote control and switch to any mode 

but “Bt”.

 

• Disconnecting takes time because the TV must receive a response from the Soundbar. 

(The time required may differ, depending on the TV model.)