Samsung SDM-160N ユーザーズマニュアル

Digital Multiplexer 

The monitor screen (full screen and division) may be seen with a temporary stop. 

A desired screen may be temporarily stopped selectively in the division screen indication mode.

The LED turns on and monitor image stops and “FREEZE” character is indicated on the screen if

pressing the “FREEZE” button in the FULL screen mode. The LED turns off and the stop mode is

released if pressing the “FREEZE” button once again.

The LED blinks if pressing the “FREEZE” button. The selected screen stops if selecting a channel

to freeze, and “F” character is displayed. The selected channel is released if pressing the relevant

channel again and stop of all channels if pressing the “FREEZE” button.

➢

The “FREEZE” button does not operate in the following cases: 

- In setting division screen mode

- In setting of program mode

- In displaying ALARM/LOSS LIST on screen

The zoom screen operates if pressing “ZOOM” button in the FULL mode. The mode is changed in

the following order whenever pressing this button.

Select the area to expand using the “MOVE” (     ,      ,      ,      ) button.

Moving to the diagonal direction is allowed using the double button (right upper, left below, right upper, right

below).

➢

The “ZOOM” button does not operate in the following cases: 

- In division screen mode

- In setting division screen

- In setting of program mode

- In displaying ALARM/LOSS LIST on screen

FULL screen

4-division screen

Flash

FULL MODE

2TIMES
ZOOM 

4 TIMES

ZOOM  

FULL MODE

➞

➞

➞

→

→

→

→