Samsung SDM-160N ユーザーズマニュアル

Digital Multiplexer

ENGLISH

- The following is displayed if pressing the “ENTER” button with the blinking position placed at the “SPOT OUT...”:

• 

You can set the sequence time of SPOT output.

• 

The blinking indication moves if pressing “     ”, “     ” button.       

• 

The setting value is changed if pressing  “       ”, “       ” button.

CH1~CH16 : 0 to 30 seconds.

Alarm S/W TIME : 01 to 30 seconds.

• 

The changed setting value is stored if pressing the “SET” button and you can return to the “MON OUT SET” menu.

✴ 

The channel of LOSS or “ 0 ” of sequence time will be skipped in the SPOT output sequence.

✴ 

SPOT OUTPUT on alarm

When the alarm is activated, only the alarmed channel will be output.

On single alarm : output only the alarmed channel.

On multiple alarms : output alarmed channels in turn at intervals of set ALARM  S/W TIME.

(Even the sequence time of the alarmed channel is set as “ 0 ” then will be SPOT output.)

- The following is displayed if pressing the “ENTENR” button with the blinking position placed at “SEQUENCE….”: 

• 

Set the indication time (second) of each channel in the automatic conversion mode. 

• 

The blinking indication moves if pressing “     ”, “     ” button.

• 

The setting value is changed if pressing “      ”, “       ” button.

CH1 ~ CH16 : 0 ~ 30   

“0” is skipped irrespective of existence of channel loss in the automatic conversion mode.

• 

The changed setting value is stored if pressing the “SET” button and you can return to the “MON OUT SET” menu. 

→

→

→

→

→

→

→

→