Samsung SDM-160N ユーザーズマニュアル

Rear panel

A. CAMERA INPUT / LOOP THROUGH OUT

- Up to 16 camera signals can be input. When transmitting camera signals to external devices, OUT

terminal can be used.

B. ALARM IN / ALARM OUT / VTI TERMINAL

- VTI: TRIGGER Output Connection terminal of VCR
- ALARM IN: Up to 16 ALARM Sensors can be connected. “G” indicates grounding terminal connect-

ed to ALARM Input, and should be connected to grounding terminal of sensors.

- ALARM OUT (HOT/COLD): When ALARM is activated, ACTIVE MAKE Signal is generated.
- ALARM RESET : Connected to RESET terminal of VCR, and when ALARM is deactivated, PULSE

is generated.

- MOTIOM OUT(M/O) : When MOTION is activated, ACTIVE MAKE signal is generated.

C. VCR IN/OUT (BNC)

Indicates terminal for connecting to VCR Input/Output.

D. MONITOR OUT (BNC)

Indicates terminal for connecting to Monitor’s video Input terminal.

E. SPOT OUT (BNC)

Indicates terminal for connecting to Monitor’s video Input terminal.

F. VCR IN/OUT (4PIN MINI DIN)

Indicates terminal for connecting to VCR’s S-VHS Input/Output terminal.

✴

SDM-160M/SDM-160MP:Not used.

G. MONITOR OUT (4PIN MINI DIN)

Indicates terminal for connecting to Monitor’s video S-VHS Input terminal.

✴

SDM-160M/SDM-160MP:Not used.

H. RS-232C

With RS-232C cable, Remote Control can be done.

I. RS-485

With RS-485 cable, Remote Control can be done.

J. ~AC IN

Connects to Power Cord.

Digital Multiplexer

1-4

ENGLISH