Samsung 320 W 4.1Ch Soundbar H751 ユーザーズマニュアル

9

ENG

  REMOTE CONTROL

  

  Press to select Treble or Bass. Then, use the #,$ button to adjust the 
Treble or Bass volume from -3 to +3.

  DIMMER : Press the DIMMER/Anynet+ button to control the brightness 
of the VACUUM TUBE AMP. DIMMER does not function for 30 seconds 
after you turn on the product for the very first time.

  Anynet+ : Press and hold the DIMMER/Anynet+ button for more than 
5 seconds to turn the Anynet+ function and AUTO POWER LINK function 
on or off. The Anynet+ function lets you control the Soundbar with the 
remote from an Anynet+ compatible Samsung TV. The Soundbar must be 
connected to the TV via an HDMI cable. See page 23 for details about 
AUTO POWER LINK.

  Press to set the REPEAT function during music playback from a USB 
device.

  REPEAT OFF : Cancels Repeat Playback.

  REPEAT FILE : Repeatedly play a track.

  REPEAT ALL : Repeatedly play all tracks.

  REPEAT RANDOM : Plays tracks in random order. 
(A track that has already been played may be played again.)

  You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.

  Press to select a source connected to the Soundbar. 

  If there is more than one file on the device you are playing, and you press 
the $ button, the next file is selected.

  If the Soundbar is connected to a digital TV and the video appears out of 
sync with the audio, press the AUDIO SYNC buttons to sync the audio 
with the video. Use the #,$ buttons to set the audio delay between 0 
ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync 
function may not work.

 You can also activate Wi-Fi SETUP function by pressing and holding 
AUDIO SYNC button on the remote for over 7 seconds.

  

  

●   Soundbar is a Samsung proprietary name.

●   Operate the TV using the TV's remote control.