Samsung HW-F450 ユーザーズマニュアル

functions

The Crystal Surround Air Track is automatically turned on when you turn on the 
TV or any device connected to the Air Track with the optical cable.

Press AUTO POWER on the remote control of this unit.

•  The Auto power link function turns on and off each time you press AUTO 

AUTO POWER LINK

Display

ON

POWER LINK ON

OFF

POWER LINK OFF

 

If a TV or any device connected to Air Track with the optical cable is 
off and there is no digital input, the Air Track is turned off after 20 
minutes.

 

These functions are available only when Anynet+ (HDMI-CEC) is 
turned off.

Video may appear out of synch with the audio if the Air Track is connected to a 
digital TV. If this occurs, adjust the audio delay time to match the video.

Press AUDIO SYNC +/–. on the remote control of this unit.

•  You can use the + , - buttons to set the audio delay time between 0 ms 

and 300 ms.

 

In USB mode, TV mode or BT mode, the Audio Sync function may 
not work.

This feature balances the range between the loudest and quietest sounds. 
You can use this function to enjoy Dolby Digital sound when watching movies 
at low volume at night.

Press DRC on the remote control of this unit.

•  Each time the button is pressed, the selection changes as follows :

DRC STANDARD 

➡ DRC MAX ➡ DRC MIN  

This feature controls the brightness of the Display. 

Press DIMMER on the remote control of this unit.

•  Each time the button is pressed, the selection changes as follows :

DIMMER ON 

➡ DIMMER OFF

If the TV and Air Track are connected via HDMI, this button lets you select 
between listening to audio through your TV or through the Air Track. 

Press SPEAKER on the remote control of this unit.

AUDIO MODE

SPEAKER

Scroll Display

Display

HDMI IN

TV

TV SPEAKER

TV SPK

Air Track

AVR SPEAKER

HDMI

ARC

TV

TV SPEAKER

S MUTE

Air Track

AVR SPEAKER

TV ARC