Samsung WA6700 Top loading Washer with Activ Dualwash™, 14kg ユーザーズマニュアル
28 English
Oper
ations
Operations
02 Delay End
Press this button to finish the wash at a specified time.
To cancel the Delay End settings, simply turn off the washing
machine.
You can set the Delay End time up to 19 hours.
To cancel the Delay End settings, simply turn off the washing
machine.
You can set the Delay End time up to 19 hours.
03 Water Level
The water level is adjusted according to the cycle. However, you can
change the level manually.
change the level manually.
04 Wash
Press to start washing, or adjust the wash time between 6 and 30
minutes.
minutes.
05 Rinse
Press to run the rinse cycle, or change the rinse count up to 5.
06 Power Spin
Press to run the spin cycle, or change the spinning time in this
sequence: 1-9 min (increase by 1 minute) > 15 min > 30 min.
sequence: 1-9 min (increase by 1 minute) > 15 min > 30 min.
07 Activ Dual
Wash
This button provides two options, and is available only when the
washing machine is stopped or in Standby state.
• Water Save (default): Select to reuse water in the tub that remains
washing machine is stopped or in Standby state.
• Water Save (default): Select to reuse water in the tub that remains
after using Water Jet. The water will be used for the main cycle.
• Drain: Select to drain water that remains after using Water Jet.
When draining is complete, the washing machine switches to
Water Save mode automatically. Then, you can choose a cycle.
Water Save mode automatically. Then, you can choose a cycle.
08 Power Wash
Power Wash introduces a digital inverter motor to fine-tune the
water-flow level for washing and spinning.
water-flow level for washing and spinning.
09 Magic Wash
Magic Wash lets you adjust the water-flow level for washing and
spinning. Three options are available: LOW, MIDDLE, and HIGH.
spinning. Three options are available: LOW, MIDDLE, and HIGH.
10 Power
Press once to turn the machine on, or twice to turn it off.
11 Start/Pause
Press to stop or resume operation. To change the cycle sequence,
press once to stop operation, and then change the sequence. To
resume operation, press again.
press once to stop operation, and then change the sequence. To
resume operation, press again.
12 Cycle Panel
Choose one that best suits your needs.
WA6700JS-03515B-04_EN.indd 28
2016-08-17 11:49:39