Samsung SSA-S3020 ユーザーズマニュアル

English 

English _ 25

To register a master card along with your fi ngerprint

Follow the steps 1 through 6 above in “To register a master card”.

Press 

 to register your fi ngerprint.

Place your fi nger on the fi ngerprint scanner.

Release your fi nger, then put your fi nger onto the fi ngerprint scanner 
again when the light turns on.

  When done, the master ID and your fi ngerprint template will be registered.

The default master ID is “00000000”, and no fi ngerprint recognition is used.

If at least one master ID is registered, the default master ID, “00000000”, is no 
longer available.

You can register up to a total of 10 master IDs (01 ~10).

To erase a master ID, enter “00000000” for the applicable master ID.

The master number for SSA-S30X1 is ““0000000000 (10 digits)”.

To register a master card PIN

Press the 

 SETUP MENU button.

Use the buttons 

 and 

 to move to the MASTER ID REG item and 

press 

.

Select a master ID index to register and press 

.

To select a PIN, press 

.

Enter the PIN for the master card to register and press 

.

PIN Range
-SSA-S30x0 : Numeric letters in 8 digits 
                        Ranges from 00000001 to 99999999
-SSA-S30x1 :  Numeric letters in 10 digits 

Ranges from 0000000001 to 4294967295

Press 

 to exit registering the PIN.

M








•

1/2

TO REGISTER F/P
PUT YOUR FINGER

2/2

LIFT AND
PUT YOUR FINGER

4. MASTER ID REG

00/00

4. MASTER ID REG
    MASTER #1
       EMPTY

4. MASTER ID REG
    1:CARD, 2:PIN

4. MASTER ID REG
ENTER PIN
PIN:_

PIN: 12312345

ENTER F/P FLAG
0:NOT USE 1: USE