Samsung 460 W 4.1Ch Soundbar J470 ユーザーズマニュアル

15

14

 

● Do not connect the power cord of this product or your TV to a wall outlet until all connections between 

components are complete.

● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.

CONNECTING THE SUBWOOFER AND SWA-

7000S TO THE MAIN UNIT

The linking IDs of the SWA-7000S wireless module and the subwoofer are preset at the factory. The subwoofer and 

the SWA-7000S should link (connect wirelessly) to the main unit automatically when you turn on the main unit, the 

subwoofer, and the SWA-7000s.
•

When the subwoofer and SWA-7000S are completely connected, the blue LED Link indicators on the subwoofer 

and the SWA-7000S stop blinking.

CONNECTING SUBWOOFER AND SWA-7000S MANUALLY

If the blue LED lights do not stop blinking when the main unit, subwoofer, and SWA-7000S are turned on, please reset 

the linking ID by following the procedure below.

Plug the power cords of the main unit, subwoofer, and SWA-7000S into an AC wall outlet.

Press the 

ID SET button on the back of the subwoofer and the SWA-7000S with a small, pointed object for 5 

seconds.
•

The STANDBY indicator turns off and the LINK indicator (Blue LED) blinks quickly.

While the main unit is powered off (in STANDBY mode), press and hold the 

 (Mute) on the remote control for 5 

seconds.

The 

ID SET message appears on the Soundbar's display.

To finalize the link, turn the main unit’s power on while the blue LEDs on the subwoofer and the SWA-7000S are 

blinking.
•

The main unit, subwoofer, and SWA-7000S should now be linked (connected).

The Link indicators (Blue LEDs) on the subwoofer and SWA-7000S should be glowing continuously. They 

  should not be blinking. 
•

If the Link Indicators are not solid blue, the linking process has failed. Turn off the main unit and start 

  again from Step 2.

CONNECTIONS

CONNECTIONS

SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω

L

R

HW-J470 XS ENG-0313.indd   14

2015/4/9   9:45:41