Samsung RS803GHMEWZ Side by Side with All Around Cooling, 812L ユーザーズマニュアル
English - 20
If the refrigerator side is lower:
• Insert a fl athead screwdriver into the height
leveler located at the bottom back of the
refrigerator door and turn in the direction of the
arrow until it is level.
refrigerator door and turn in the direction of the
arrow until it is level.
• Raise the front of the refrigerator so that
the doors close by themselves.
Adjusting the levelers so that the back
of the refrigerator is much higher than
the front of the refrigerator can make it
diffi cult to open the doors.
Adjusting the levelers so that the back
of the refrigerator is much higher than
the front of the refrigerator can make it
diffi cult to open the doors.
• If the back of the refrigerator is not level,
support the bottom with an appropriately
sized object and secure the object in
place using tape. Slide the refrigerator
into its spot and then adjust the level.
sized object and secure the object in
place using tape. Slide the refrigerator
into its spot and then adjust the level.
• When pushing the refrigerator in, be
careful not to damage the fl oor.
How to adjust the door height
If one door is lower than the other:
• The door height levels can be adjusted using
the adjustment nuts located at the bottom of
each door.
each door.
• Raising the door too high can cause the door to
interfere with the hinge cover when it is opened
or closed.
or closed.
A
A
B
B
1.
Open the door that needs to be adjusted and
loosen the clamping nut (A) at the bottom of
the door by turning it in the clockwise direction
(
loosen the clamping nut (A) at the bottom of
the door by turning it in the clockwise direction
(
) using the spanner included in the
product package. (Raise the lower of the two
doors fi rst.)
doors fi rst.)
A
A
2. Adjust the height of the door by turning the
adjustment nut (b) in the counterclockwise
direction (
direction (
) with a spanner.
(Turn it in the counterclockwise direction (
)
to increase the height of the door and in the
clockwise direction (
clockwise direction (
) to decrease it.)
-
Open the door and adjust it from the inside.
B
B
3. Once the doors are level, turn the clamping nut
(a) in the counterclockwise direction (
) to
tighten it.
A
A
•
Adjusting the level when the refrigerator
is empty can result in the refrigerator
becoming uneven again once items have
been placed inside. If this occurs, adjust
the level again.
is empty can result in the refrigerator
becoming uneven again once items have
been placed inside. If this occurs, adjust
the level again.
DA68-03048B (EN)-00.indd 20
DA68-03048B (EN)-00.indd 20
2014. 3. 13.
8:32
2014. 3. 13.
8:32