Samsung HW-M4500 クイック設定ガイド

ENG - 8

ENG - 9

Hear TV sound from your Soundbar through wired or wireless connections.

 

• When the Soundbar is connected to a Samsung smart TV released in 2017 or later, the Soundbar 

can be controlled using the TV’s remote control.

 

– This function also allows you to use the TV menu to adjust the sound field and various settings 

as well as the volume and mute.

OPTICAL OUT

1.  Connect the oPtIcaL In (Audio) jack on the Soundbar to the OPTICAL OUT jack of the TV with a 

digital optical cable.

2.  Press the 

 (Source) button on the top panel or remote control, and then select the “D.In” mode.

 

• When the Soundbar is connected to a Samsung smart TV released in 2017 or later, the 

Bluetooth POWER function automatically turns on to enable the Soundbar to be controlled with 
the TV remote control. (See page 19 for details on Bluetooth POWER.)

Auto Power Link automatically turns on the Soundbar when the TV is turned on.

1.  Connect the Soundbar and a TV with a digital optical cable.
2.  Press the 

 (Source) button on the top panel or on the remote control, and then select “D.In”.

3.  Press the Left button on the remote control for 5 seconds to turn Auto Power 

Link on or off.

 

• Auto Power Link is set to ON by default. 

(To turn off this function, turn off Auto Power using the Soundbar.)

 

• Depending on the connected device, Auto Power Link may not function.

 

• This function is only available in the “D.In” mode.

HDMI IN

(ARC)

1.  With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure.
2.  “tV arc” appears in the display window of the Soundbar main unit and the Soundbar plays TV 

sound.

 

• If TV sound is inaudible, press the 

 (Source) button on the remote control or on the top 

panel of the Soundbar to switch to “D.In” mode. The screen displays “D.In” and “tV arc” in 
sequence, and TV sound is played.