Samsung SNC-C6225P ユーザーズマニュアル
14 – 10x Network Mini Smart Dome Camera
installation
RS-485 Termination Resistor
Pin 8 is used for ON/OFF of RS-485 Termination.
Normally, it must be OFF state. Especially when
you have trouble with long Daisy chain style
connection, turn ON this termination switch of last
camera.
Normally, it must be OFF state. Especially when
you have trouble with long Daisy chain style
connection, turn ON this termination switch of last
camera.
Pin 8 : RS-485 Termination Resistor (ON/OFF)
INSTALLATION USING SURFACE
MOUNT ON THE CEILING
MOUNT ON THE CEILING
SNC-C6225
1. To pass cables to upside of ceiling, please, make
about ø60mm hole on the ceiling panel.
2. Screw surface mount bracket to ceiling with
4 screws.
❖
•
–
❖
3. Wire cables to terminal block and connect the
terminal blocks to main unit.
4. Screw main unit to surface mount bracket with
4 lock-up screws.
5. Detach protection vinyl from dome cover.
1
2
3
4
5
6
ON
ON
7
8