Samsung SNC-C6225P ユーザーズマニュアル

English – 21

operation

Before power is applied, please check the cables 
carefully.

The camera ID of the controller must be identical to 
that of the camera to be controlled. The camera ID 
can be checked in the System Information of OSD 
Menu.

If your controller supports multi-protocols, the protocol 
must be changed to match to that of the camera.

If you changed camera protocol by changing DIP 
switch, the change will be effective after you reboot 
the camera.

Since the operation method can be different for 
each controller available, refer to the manual for your 
controller if camera can not be controlled properly. 

Check how to operate Preset, Scan, Auto Pan and 
Pattern function with controller or DVR in advance to 
operate camera function using them. (refer to your 
System keyboard Manual)

If controller or DVR has no pattern button or function, 
use shortcut keys with preset numbers. For more 
information, refer to “Reserved Preset” in this 
manual.

If the camera is continuously subjected to very high 
temperature (over 50°C or 122°F) environment for a 
long time, it is possible for the camera to lose focus.
As a result, you will get blurry image. In this case, it 
is recommended to turn on “Auto Calibration” by 
running Preset 165.

If you execute AUTO CALIBRATION, camera will 
calibrate its focus at every 6 hours. To turn off this 
function, please, run Preset 166.

•

•

•

•

•

•

•

•

•

Function

Using the OSD menu, Preset, Pattern, Auto Pan, 
Scan and Alarm Input function can be confi gured for 
each application.

Enter Menu

<Go Preset> [95]

Description

Some Preset numbers are reserved for direct access 
to specifi c functions in OSD menu. These direct 
commands via preset provide quick execution of 
various functions using keyboard controller as well as 
simplify the interface with DVR and IP equipments.

Function

<Go Preset> [95] 

: Enters into OSD menu

<Go Preset> [131~134]  : Runs Pattern Function 1~4

<Go Preset> [141~148]  : Runs Auto Pan Function 1~8

<Go Preset> [151~158]  : Runs Scan Function 1~8

<Go Preset> [161] 

: Sets Relay Output to OFF

<Set Preset> [161] 

: Sets Relay Output to ON

<Go Preset> [165] 

: Auto Calibration ON.

<Go Preset> [166] 

: Auto Calibration OFF.

<Go Preset> [167] 

: Zoom Proportional Jog ON

<Set Preset>[167] 

: Zoom Proportional Jog OFF

<Go Preset> [170] 

: Sets Camera BLC Mode to OFF

<Go Preset> [171] 

: Sets Camera BLC Mode to HIGH

<Go Preset> [174] 

: Sets Camera Focus Mode to AUTO

<Go Preset> [175] 

: Sets Camera Focus Mode to Manual

<Go Preset> [176] 

:  Sets Camera Focus Mode to SEMI-

AUTO

<Go Preset> [177] 

: Sets Day & Night Mode to AUTO1

<Go Preset> [178] 

: Sets Day & Night Mode to NIGHT

<Go Preset> [179] 

: Sets Day & Night Mode to DAY

<Go Preset> [190] 

:  Sets OSD Display Mode to AUTO 

(Except Privacy Mask)

<Go Preset> [191] 

:  Sets OSD Display Mode to OFF 

(Except Privacy Mask)

<Go Preset> [192] 

:  Setting OSD Display Mode to ON 

(Except Privacy Mask)

<Go Preset> [193] 

: Sets all Privacy Mask Display to OFF

<Go Preset> [194] 

: Sets all Privacy Mask Display to ON

<Go Preset>[200] 

: Digital Zoom ON

<Go Preset>[201] 

: Digital Zoom OFF

•

•

•

•