Samsung SNC-C6225P ユーザーズマニュアル

ページ / 76
English – 35
how to use osd menu
CAMERA SETUP
Setup the general functions of zoom camera module
FOCUS MODE  [AUTO/MANUAL/ONEAF]
Sets camera focus mode.
Š ONEAF
This mode exchanges focus mode automatically 
between Manual Focus mode and Auto Focus 
mode. Manual Focus mode activates in preset 
operation and Auto Focus mode activates when jog 
operation starts. 
With Manual mode at presets, Focus data is 
memorized in each preset in advance and camera 
calls focus data in correspondence with presets as 
soon as camera arrives at a preset.
DIGITAL ZOOM  [ON/OFF]
Sets digital zoom function to ON/OFF. If this is set to 
OFF, optical zoom function runs but zoom function 
stops at the end of optical zoom magnifi cation. 
IMAGE FLIP 
[ON/OFF]
To display Upside down image.
White Balance Setup
WB MODE 
[AUTO/MANUAL]
In Manual mode, Red and Blue level can be set up 
manually
RED ADJUST   [10~60]
BLUE ADJUST  [10~60]
Auto Exposure Setup
BACKLIGHT [OFF/LOW/MIDDLE/HIGH]
Sets Backlight Compensation
DAY/NIGHT [AUTO1/AUTO2/DAY/NIGHT]
The illumination condition for switching between Day 
and Night modes of AUTO1 is brighter than that of 
AUTO2.
BRIGHTNESS [0~100]
Adjusts brightness of images. Iris, Shutter Speed and 
Gain are adjusted automatically in correspondence 
with this value.
IRIS  
[AUTO/MANUAL(0~100)]
If Iris is set to Auto, Iris should have highest priority in 
adjusting AE and Shutter Speed should be fi xed.
If Iris is set to Manual, Iris should be fi xed and Iris 
has lower priority in adjusting AE, in comparison with 
others.
ZOOM CAMERA SETUP 
FOCUS MODE 
ONEAF
DIGITAL ZOOM  ON
IMAGE FLIP 
OFF
<WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
BACK
EXIT
WB SETUP 
WB MODE 
AUTO
- RED  ADJUST   ---
- BLUE ADJUST   ---
BACK
EXIT
AE SETUP
BACKLIGHT OFF
DAY/NIGHT AUTO1
BRIGHTNESS 25
IRIS AUTO
SHUTTER ESC
AGC NORMAL
DNR MIDDLE
SENS-UP OFF
BACK
EXIT