Samsung SNC-C6225P ユーザーズマニュアル

English – 43

network connection & setup

This is enabled for a modem using DHCP.

Set the IP address referring to "Setting Static IP" on page 46 or "Setting Dynamic IP" on page 49.

Launch an Internet browser on the local PC connected to the IP Router.

Enter the IP Router’s address in the address bar of the browser.
ex) http://192.168.1.1 ,http://192.168.0.1 or http://192.168.xxx.1

For the DDNS URL address, refer to “Checking the DDNS address” on page 51.

When the IP Router is connected, the login window appears and prompts you to enter the password.

For the login IP and the password, refer to the IP router’s documentation.

When done, you will see the setup window of the IP router. In the setup menu, select <Automatic 
Confi guration-DHCP> for <Internet Connection Type>. 

For the menu location of <Internet Connection Type> or DHCP selection, refer to the IP router’s documentation.

When done, click the [Save] or [Apply] button to save the settings.

Launch an Internet browser on the remote PC.

Enter the DDNS URL address in the address bar of the browser for connecting to the camera.
ex) http://e30002c.websamsung.net

For the DDNS URL address, refer to “Checking the DDNS address” on page 51.

To check if your xDSL / Cable modem uses DHCP, contact your Internet Service Provider.

•

M



M



•

M



SNC-C6225

xDSL or Cable Modem

External Remote PC

DDNS Server 

(Data Center, KOREA)