Samsung SNC-C6225P ユーザーズマニュアル

46 – 10x Network Mini Smart Dome Camera

Run the <IP Installer.exe> program and display the camera list found on the screen.
For the initial run, the [Auto Set] and [Manual Set] button are all disabled.

Select a camera you want from the camera list.

Confi rm the MAC Address of the camera on its base panel.
Check the MAC address in System Information under the 
Setup menu of the camera.
The [Auto Set] and [Manual Set] button are activated.

Click the [Manual Set] button.

The Manual Set window appears.
The <IP Address>, <Subnet Mask>, <Gateway> and <HTTP 
Port> values of the camera are displayed in their default values.
The password is set to “4321” by factory default.

Set up the IP related settings in the <ADDRESS> fi eld.

<MAC Address>: The MAC Address is automatically 
displayed. No additional setting is required.

If using an IP router :

<IP Address>: Set it according to the private IP address range 
provided by the IP Router.
ex) 192.168.1.2~254, 192.168.0.2~254, or 192.168.
XXX.2~254
<Subnet Mask>: The IP Router’s <Subnet Mask> becomes 
camera’s <Subnet Mask> value.
<Gateway>: The IP Router’s <Local IP Address> becomes 
camera’s <Gateway> value.

If not using an IP router :

For the <IP Address>, <Gateway> and <Subnet Mask> settings, 
contact your network administrator.

For the menu location of Internet Connection Type or DHCP selection, refer 
to the IP router’s documentation.

•
•

•

•
•

•

•

•

•

•

•

M



setting static ip