Samsung SNC-C6225P ユーザーズマニュアル

English – 61

setup tool

Shows the time according to the setting of System 
Time Setup. 

You can set the time synchronized with NTP server 
(Time Server) or PC, or manually setup.
(

Ú The date can be confi gured between 1 January 

2000 and 31 December 2037)

NTP Server IPs are provided by a public agency 
and their list is therefore subject to change.

In a local network, a separate NTP server must 
be manually defi ned.

The current time can vary depending on the 
computers regional (GMT and DST) and country 
(PC time confi guration) settings. 

❖

•

❖

•

–

–

–

Shows the log information about the system 
changes along with time and IP address.

User Log In : Shows current camera login user.

Video Confi guration Change : Show video setting 
changes.

System Time Change : Shows time changes.

System Start : Shows time when the camera is 
turned on.

Up to 2000 logs can be recorde.

 If the log number is over 2000, a log in the bottom of 
log list will be deleted and added new log information.

Shows the current fi rmware version.

Click [Browse…] button and select the latest 
version of the fi rmware. Its fi le name should be 
ex) SNC-C6225-WEB_v1.XX_XXXXXX.tgz

Click [Install] button. The fi le is uncompressed and 
the software update begins. Software update may 
take tens of minutes. To cancel an update, click the 
[CANCEL] button.

When the software update is done, the system will 
automatically restart. Since the current connection 
is disconnected, you have to connect to the system 
again.

Since, if the network is disconnected, the power fails or 
the PC abnormally operates during a software update, the 
system may not work afterwards. Care must be taken not 
to cause a problem during an update.

❖

•

–

–

–

–

M




❖

•

❖

•

•

•

M

