Samsung SNC-L200N ユーザーズマニュアル
19
Video Netcam | SNC-L200
18
Video Netcam | SNC-L200
Netcam Configuration
Netcam Configuration
4. When the search for Netcam in the same router is over, the following message
appears on the screen. Click “OK.”
5. Select the Netcam you want from the screen where the search is complete.
Right click “Edit.”
Click “Set” button to apply the configuration to Netcam and save according to the “Save
Configuration Option.” During IP configuration, you cannot connect to Netcam. Please
close Internet Explore window, wait for 1 minute, and then connect to it again.
Configuration Option.” During IP configuration, you cannot connect to Netcam. Please
close Internet Explore window, wait for 1 minute, and then connect to it again.
Click “Cancel” button to cancel the configuration values.
7. Click “Set” button. The following window appears.
Click “Yes.”
8. The following screen appears for several seconds.
6. “Network Option” screen appear.
* Before Staring Network Configuration
If you connect Netcam using IP router, IP and Port
cannot be automatically allocated. You must enter
the numbers yourself using the IP router
configuration program.
For the correct configuration steps, please refer to
IP Router User’s Manual.
Refer to “3.1.1 IP Router Configuration” for details.
cannot be automatically allocated. You must enter
the numbers yourself using the IP router
configuration program.
For the correct configuration steps, please refer to
IP Router User’s Manual.
Refer to “3.1.1 IP Router Configuration” for details.
IP Type
Server Name
Network
HTTP Port
Authentication Key
IP Address
Netmask
Default Gateway
DNS1/DNS2
Click “Static.”
■
When Netcam is connected to IP router, it is considered
having a static IP internally.
having a static IP internally.
Enter Netcam’s name. The name can be a combination of
numbers and letters up to 20 characters. However,
characters such as #, ', ", : cannot be used.
numbers and letters up to 20 characters. However,
characters such as #, ', ", : cannot be used.
Enter the allocated IP address of Netcam that has been entered in
the Port Forwarding configuration during IP router configuration.
the Port Forwarding configuration during IP router configuration.
Enter the Subnet mask of IP router.
Enter the Default Gateway of IP router.
Use default value for DNS server whenever possible.
■
Default value is 168.126.63.1/168.126.63.2.
Enter the Port number of Netcam that has been entered in the
Port Forwarding configuration during IP router configuration.
Port Forwarding configuration during IP router configuration.
Enter the Netcam Administrator Password.
Save
Configuration
Option
Configuration
Option
Save All Configuration
Save Only Network
Configuration
Configuration
Not Saving
Select it to save all configuration values.
Select if to save network configuration values only.
Select it to configure only but not saving to
the internal Flash Memory.
the internal Flash Memory.