Samsung SNC-L200N ユーザーズマニュアル

Save the user configuration to the flash memory or configure the rebooting or updating
method.

The is the menu to save configuration to the flash memory.

This is the menu to reboot the system.

This is the menu to set the system to the factory default.

This is the menu to update the system.

It saves the configuration to Netcam’s flash memory so the user configuration stays after
rebooting or the power is off.

This is used when the user wants to reboot the system.
During rebooting, you cannot connect to Netcam. Please close Internet Explore window,
wait for 1 minute, and then connect to it again.

This is used to reset all the setup values to factory default conditions.

This is the Utility Menu to upgrade the system when an upgraded system software is
released.
There are two types of update: Normal Update and All Update.

In general, there is usually no “All Update.” Instead, “Normal Update” is generally used.

*  The latest software version of SNC-L200 can be downloaded from Samsung’s website

http://www.sec.co.kr.