Samsung SCC-C4307P ユーザーズマニュアル
E
18
17
Press the
ENTER
button.
✔
WDR
WDR(Wide Dynamic Range) enlarges the advantage of a
screen, mostly effective photographing both indoor and
outdoor subjects simultaneously. In short, both subjects
can be distinctly revived. Select WDR... and press
[ENTER] to set up WDR LEVEL and FLICKERLESS.
screen, mostly effective photographing both indoor and
outdoor subjects simultaneously. In short, both subjects
can be distinctly revived. Select WDR... and press
[ENTER] to set up WDR LEVEL and FLICKERLESS.
- LEVEL 1 : Controls the shutter speed while WDR
operates.
- LEVEL 2 : Controls the whole brightness while WDR
operates.
- FLIKERLESS : This is for preventing flicker on the
screen when NTSC system is used in 50HZ power
supply region and PAL system is used in 60HZ power
supply region. That is to prevent shaking on the screen
resulted from the discordance of the vertical sync
frequency and the flicker frequency of the illumination.
While this menu is ON, the electronic shutter is fixed to
1/100sec (NTSC) or 1/120 sec (PAL).
supply region and PAL system is used in 60HZ power
supply region. That is to prevent shaking on the screen
resulted from the discordance of the vertical sync
frequency and the flicker frequency of the illumination.
While this menu is ON, the electronic shutter is fixed to
1/100sec (NTSC) or 1/120 sec (PAL).
CAMERA ID
OFF
IRIS
WDR...
SHUTTER
OFF
AGC
LOW
WHITE BAL
ATW1
FOCUS MODE
AF
MOTION DET
OFF
COLOR/BW
COLOR
PRIVACY
OFF
SPECIAL
...
PRESET
...
EXIT
QUIT
(IRIS/WDR)
LEVEL1
L --- I --- H
LEVEL2
L --- I --- H
FLICKERLESS OFF
RET
RET
For items in the BLC menu, the user can set the size and location of
the BLC area by pressing [ENTER] key after put the cursor on
USER… using the [Left, Right] key. For SIZE items, you can use the
[Up, Down, Left, Right] key to designate the SIZE, and then press the
[ENTER] key. You can set the location for areas using the [Up, Down,
Left, Right] key in the LOCATION.
the BLC area by pressing [ENTER] key after put the cursor on
USER… using the [Left, Right] key. For SIZE items, you can use the
[Up, Down, Left, Right] key to designate the SIZE, and then press the
[ENTER] key. You can set the location for areas using the [Up, Down,
Left, Right] key in the LOCATION.
Use [Left, Right] key in the LEVEL menu to control the video
output level(brightness).
output level(brightness).
Press the
ENTER
button.
(IRIS/ALC)
BLC
BOTTOM...
LEVEL (0)
----I----
RET
Press the
ENTER
button.
(IRIS/ALC)
BLC USER...
LEVEL (0) ----I----
RET
LEVEL (0) ----I----
RET
Press the
ENTER
button.
SIZE
LOCATION
SIZE
LOCATION
SIZE
LOCATION