Canon ir2016, ir2020 マニュアル
Chapter 3
3-4
F-3-9
8) Put back the machine's rear cover you removed in step 2).
9) Connect the user's LAN cable to the machine.
F-3-10
10) Connect the power plug to the power outlet, and turn on the main power switch.
3.2.2 Checking the Connection
0010-7517
At the end of the work, go through the following steps to make sure that the machine properly recognizes the presence of the unit:
1) Start service mode.
User Mode key >2 > 8 > User Mode key
[#SSSW] appears.
2) Press [<-] 5 times. When [REPORT] has appeared, press [OK].
3) Press [+>] once. When [REPORT OUTPUT] has appeared, press [OK].
4) Press [+>] 5 times. When [SPEC LIST] has appeared, press [OK].
5) See that a SPEC REPORT is printed out. Check to be sure that 'BDL-IMAGE' is 'ON'.
MEMO:
"SPEC REPORT"
- If 'TOTAL MEMORY' is 128 MB,
be sure 'BDL-IMAGE (600)' is 'ON'.
- If 'TOTAL MEMORY' is 256 MB,
be sure 'BDL-IMAGE (1200)' is 'ON'.
[1]
[2]
[3]