Canon ir2016, ir2020 マニュアル
Chapter 4
4-10
Memo:
The transmission level for each frequency follows the service data.
4.8.2.4 V.34 G3 Signal Transmission Test
0011-0220
The V.34 G3 signal transmission test menu is selected by pressing the numeric button 8 from the MODEM test menu.
The V.34 G3 signals below are sent from the modem using the modular jack and the speaker by pressing the Start button. The Baud rate can be changed with the
numeric buttons, and the Speed can be changed with the cursor buttons.
T-4-21
T-4-22
Memo:
The transmission level for each baud rate and speed follows the service data.
4.8.3 Function Test
4.8.3.1 FACULTY Tests
0011-0221
The faculty tests are selected by pressing the numeric key 6 from the test mode menu.
These tests test the following faculties of this fax.
T-4-23
4.8.3.2 Operation Panel Tests
0011-0222
The operation panel test is selected by pressing the numeric key 7 from the faculty test menu.
In this test, check that the display, LED lamps and buttons on the operation panel are operating correctly.
Display test
Pressing the Start key from the operation panel menu, "H" is displayed 20 characters by 2 lines. The next time the Start key is pressed, all the LCD dots
are displayed. Check for any LCD dots in the display that are not displayed.
LED lamp test
All the lamps on the operation panel light by pressing the Start key after the display test. Check for any LED that does not blink during the test.
Operation Key Test
The operation key test is selected with the Start key after the LED lamp test is done. In this test, a character disappears when its operation key is pressed.
The list of characters and their operation keys is as follows. Check to make sure at this time that all characters properly disappear when their operation
keys are pressed.
T-4-24
8
14400 bps
Numeric button
Baud rate
0
3429 baud
1
3200 baud
2
3000 baud
3
2800 baud
4
2743 baud
5
2400 baud
Cursor button
Speed
33.6 kbps
31.2 kbps
28.8 kbps
33.6 kbps
31.2 kbps
28.8 kbps
< >
26.4 kbps
24.0 kbps
21.6 kbps
19.2 kbps
16.8 kbps
14.4 kbps
12.0 kbps
9.6 kbps
7.2 kbps
4.8 kbps
2.4 kbps
24.0 kbps
21.6 kbps
19.2 kbps
16.8 kbps
14.4 kbps
12.0 kbps
9.6 kbps
7.2 kbps
4.8 kbps
2.4 kbps
Test type
Overview
Operation panel test
Tests whether the button switches on the control panel are operating
correctly.
correctly.
Line signal reception test
Tests whether the NCU board signal sensor and frequency counter are
operating correctly.
operating correctly.
Character
Operation key
Character
Operation key
0-9,*,#
Numeric key
K
System Monitor key
A
Enlarge/Reduce key
L
Paper Select key
Numeric button
Speed