Canon ir2016, ir2020 マニュアル
8
1.2.3 After the Work
1) Cut of the area [2] of the rear cover [1] as shown us-
ing nippers.
F-1-25
2) Cut of the area [2] of the machine's rear cover [1] as
shown using nippers.
F-1-26
3) Put back the covers by reversing the steps used to
remove them.
MEMO:
If you have mounted a full sensor unit, put back the
covers identified as 3-1) through 3-3).
If you have mounted a full sensor unit, put back the
covers identified as 3-1) through 3-3).
3-1) Rear Cover
3-2) Delivery Upper Cover
3-3) Delivery Cover
3-4) Front Left Cover
3-5) Delivery Tray
3-2) Delivery Upper Cover
3-3) Delivery Cover
3-4) Front Left Cover
3-5) Delivery Tray
While mounting the delivery tray, be sure to take care
not to damage the full state sensor lever [1] and the pa-
per retainer [2].
not to damage the full state sensor lever [1] and the pa-
per retainer [2].
F-1-27
F-1-28
[1]
[2]
[2]
[1]
[2]
[1]
[2]
[1]