Clarity c4210 ユーザーズマニュアル

30

31

3.    Press the UP (

▲

) or DOWN (

▼

) button  

 

to go to the record to be stored to the  

 

EMERGENCY key.

4.    Press and hold the EMERGENCY key for  
 

2 seconds.

5.    The phone number is copied to the  
 

EMERGENCY key. The LCD will display MEM       

 

STORING for one (1) second and the  

 

handset will give a success keynote.

1.    Unit must be in standby mode only.
2.    Press the EMERGENCY key once.
3.    The display will show the stored name and  
 

number for 5 seconds. Otherwise it will show  

 

-MEMORY EMPTY-.

4.   Then the handset goes off-hook and dial out  
 

the stored numbers.

 

Or

5.    Press TALK key to make handset goes off-hook.
6.    Press the EMERGENCY key once. The display  
 

will show the stored name and number for 1  

 

sec. Then the numbers will be sent out.

1.    Unit must be in standby mode.
2.    Press the EMERGENCY key once.
3.    If this key has been programmed, the display  
 

will show the stored number. Otherwise, it  

 

will show MEMORY EMPTY.

4.    Press DEL/CH key once to delete number.
5.    The display will flash DELETE?.
6.    Press DEL/CH to delete. The handset will  
 

give a success keynote and the display will  

 

show MEM DELETED.

Note: This is a service that is provided through your 
local telephone company.

If the C4210 finds that there is voice message to be 
retrieved, it will turn on the Message Waiting Indica-
tor (the ENTER key).

To retrieve the voice message, press the ENTER key 
while the indicator is on. The handset will go off-
hook and dial the stored Voicemail number.

This function is turned off when EASY MODE is set 
to ON during setup.

When somebody calls, the received caller informa-
tion is displayed on the LCD. If the call is answered 
by this phone, this caller information is considered 
“old”. Otherwise, the Caller ID information will be 
stored in the call log. Information which has not been 
reviewed will be considered as “new call”.

The NEW CALL LED will blink. The top row displays 
the time and date of the call. The second row displays 
the caller’s ID or is blank if there is no information. 
The third row displays the incoming telephone num-
ber. If the number is longer than twelve (12) digits, 
the LCD will toggle the displayed number between 
the first 12 digits and the remaining digits.

When you are on an existing call, you will hear a 
beep and the display will show incoming call waiting 
Caller ID information.