Clarity c4210 ユーザーズマニュアル
38
39
TROUBLESHOOTING
TROUBLESHOOTING
Noise, Static, Interference or Other Calls
Heard while Using the Handset:
Heard while Using the Handset:
•
Try changing channels.
•
Make sure the base antenna is in an
upright position.
•
Make sure you are in the usable range of the
base station.
•
Make sure the handset battery is fully charged.
•
Try relocating the base unit to another location.
•
Make sure the AC Adapter is not plugged into
the wall outlet with other appliances.
Phone Will Not Hold Charge:
•
Make sure the charging contacts on the
handset and base are free of dust and dirt.
Clean the contacts with a soft cloth.
•
Make sure CHARGE LED on the base is lit
when handset is in the cradle.
•
If necessary, replace the handset battery. (See
Handset Battery Charging)
Difficulty in Placing or Receiving Calls:
•
Move closer to the base and try again.
•
If moving closer does not work, you may have
lost the security code.
•
Reset code by placing the handset back on
the base for 5-10 seconds. (See Security
Code Section)
• Make sure you have selected the correct
dialing mode, tone or pulse.
•
Make sure the AC Adapter is not plugged into
a wall outlet with other appliances. Discon-
nect for 5-10 seconds then reconnect. Place
the handset back on the base and reinsert the
AC Adapter.
•
Make sure the handset battery is fully charged.