b-52 lx18v2 ユーザーズマニュアル

2

a. Avoid areas with high temperature (i.e. near heater).  

b. Keep speakers out of extended or direct sunlight. 

c. The LX-18V2 is intended for portable use in which the speaker should be

placed on the floor, stage or a solid platform. Do not place on 

unstable or non-level surfaces.

d.  The LX-18V2 can produce high-energy levels.  When placed on slippery

surfaces, such as polished wood or smooth tiles, the subwoofer may 

move because of its intense bass output.  Precautions should be 

taken to ensure the subwoofer does not fall off a stage or raised surface.

e.  If a full-range cabinet is placed on top of the LX-18V2, it should be

secured to the subwoofer to prevent the speaker from falling off.

B-52 Pro-Audio speakers, especially the LX-18V2s, are capable of pro-

ducing sound pressure levels (SPL) sufficient to cause permanent

hearing damage to performers, production crews or people in the

audience!  Adequate hearing protection devices are recommended.

Caution should be taken to avoid extended exposure to SPL in

excess of 90 dBA or at a level that causes discomfort.

The LX-18V2 is not intended for suspension or hanging.  Under NO 

circumstance should you attempt to suspend or hang this subwoofer.

1)  Your system must be turned completely OFF before connecting or 

disconnecting the LX-18V2.  Connecting or disconnecting the LX-18V2 

while the sound system in ON may damage the subwoofer and the audio 

components in your sound system.

2)  Make sure the gain or level control(s) on the amplifier(s) is turned all the 

way down when turning the system on or off!

3)  Disconnect the LX-18 prior to moving the sound system or the subwoofer.